If you’ve ever wanted to open and repair your Xbox One, you’ve likely wondered how to take apart Xbox One’s controller. This article will teach you how to disassemble the Xbox One controller, as well as cleaning and repair it. You’ll also learn how to find the controller’s internal components, which are all accessible from the top of the console. Hopefully, this guide will help you do just that.
Table of Contents
Disassembling the Xbox One controller
Before you begin disassembling the Xbox One controller, you should record the assembly procedure. This will help you locate the parts you need later. To begin, disconnect the controller housing from the circuit board assembly. You may want to label the parts with some sort of adhesive promoter or spray paint. Once you’ve completed the process, reassemble the device. It should work as expected. Here’s how to disassemble the Xbox One controller.
Disassembling the Xbox One controller is relatively simple, but you’ll need special tools to get it right. Because of its unique design, conventional screwdrivers can’t easily reach the components inside. A guitar pick or an ATM card may work as a prying tool. Alternatively, you can buy an Xbox One controller tool kit online. If you don’t have any of these tools, you can find similar products in stores or online.
Cleaning the controller
If your controller is squeaky or has buttons that jam, you’ll need to clean it. You can use alcohol to cut through grime and bacteria on your controller. You can also soak a Q-tip in the substance, as it will remove stubborn dirt and grit. The controller’s seam, where the front and back snap together, is another area that is susceptible to bacteria and grime.
Before you begin cleaning your Xbox One controller, be sure to check the inside of every part, including the D-pad, buttons, thumbsticks, shoulder buttons, triggers, and rumble motors. You can’t clean all of these parts with a damp cloth, so use a toothpick instead. Don’t use too much force, as you could push crumbs deeper into the controller.
Repairing the controller
First, make sure the controller is plugged into the console. If the console detects a controller, you may need to update the controller’s firmware or software. To do this, press the Xbox button on your controller and follow the steps in the guide. If there are no updates available, check for firmware updates and download the latest version. If you can’t find them, then the controller’s firmware is outdated.
Next, make sure you have the right parts for the Xbox One controller. To repair the controller, you must know the model of your console. You should also make sure that you purchase the right repair guide for your model. This is important because some parts aren’t compatible with different generations. It is also important to have the correct tools. A screwdriver is essential in removing the conductive button pad. You can get this screwdriver from any hardware store for a few dollars. You will also need a flat-head screwdriver to pry off the plastic grip panels. Wedging the screwdriver between the triggers will pop off the panels. Once you have the panel off, the Xbox One controller will come apart.
Opening the controller
To open the controller of Xbox One, first turn the console off. Then, place it on a table or hard surface. Use a flathead screwdriver to pry off the four rubber screws covering the bottom of the controller. Once you’ve removed the screws, use a flathead screwdriver to unscrew the two stickers located on the side of the console. Then, peel off the remaining plastic panels.
Now, the controller is ready to be opened. Some thumbsticks may be loose, so if this happens, you can glue a small metal pole into the controller. If you’re lucky, you can also push it into the analogue controller mounted on the circuit board. Then, you can strip the controller down to the PCBs and triggers, and inspect the buttons. You can then replace the thumbstick, if necessary.
